Notice: Due to the ongoing COVID-19 pandemic and new restrictions that have been put into place, our retail outlet is open for click and collect and shipping only. If you have any enquiries, give us a call on 01773 713713 We would be delighted to assist you. 
PIR Movement Sensor - Fall Alarm for Paging System
An infrared motion sensor alerting to movement. Qty 1

PIR Movement Sensor - Fall Alarm for Paging System

More Views

£294.00

* Required Fields

An infrared motion sensor alerting to movement.

The PIR Motion sensor is a small battery-powered sensor that can be positioned in a variety of ways to alert to movment through a doorway, corridor, next to a bed or over a wider area.

The sensor works using the same infrared technology as the systems used to turn on outdoor lighting. The sensor is positioned pointing towards the area where movement detection is requried. Sensor can be positioned on a wardrobe or wall pointing towards the area next to the bed. When movement is detected in this area the sensor sends the alert through existing call system. 

By adjusting the eyelids over the sensor it is possible to steer the sensor’s beam so that it only detects over
a certain area. The sensor can work in both darkness and light.
 

The ‘eye’ has two eyelids which move to steer the angle of the detection beam. They can be rotated to give a very tight angle or opened up to give a very wide detection field. By choosing the right position for the sensor and setting the angle, any detection setup is possible. The diagram below demonstrates some common configurations.

Setup1 is the sensor position detecting movement to the right. Setup2 gives a wide detection area across a room or hallway. Positioned at head height on a wall, movement across the whole room is detected. Setup3 gives detection below and to the right and Setup4 will detect movement infront of and below the sensor. The beam has a long range of over ten meters. Closing the eyelids totally will stop the sensor from detecting, as will switching the sensor off. Experiment with position and setup for the perfect system.
 
PLEASE NOTE - Pager not included (must be purchased seperately)

The transmitter requires a name which will show on the pager when triggered, (example - Franks Bed). Please ensure you specify this clearly when ordering. You may use multiple mats to a single pager. If you have purchased any paging system from our range previously then you do not need to order another pager unless you wanted to.

Specifications:

Control box - pager-linked:
Power supply 2x AA Alkaline Battery (Removable, not rechargeable)
Frequency 433.92MHz
Bit Rate 1200 - 7uV/M
Code format POCSAG
Dimensions (pager-linked): 147mm x 88mm 25mm

Control box - plug-matched:
Power supply 2x AA Alkaline Battery (Removable, not rechargeable)
Dimensions (plug-matched): 117mm x 78mm 24mm
Weight with battery 140g

 



Testimonials
Truly exceptional levels of customer service, the best I have experienced for many years. Very helpful staff made follow up calls
Susan Watson
 
Dear All, I am sad to have to inform you that our Company Chairman and owner will be retiring and our business will close on t
Jane Nathan